Electromagnetic lift

Category: Crane Spare Parts

Application: Suitable for transferring cast ingots, steel balls and various kinds of steel scraps.

Product introduction

The electromagnet is designed to lift steel scraps and also can be installed on the excavator.It adopts a special magnetic circuit design which has the large airspace and magnetism density. It is made of aluminum wire and the coil protection plate is made of the rolled high Mn steel plate that has a good performance of wear-resistance and heat-proof. It also has the characteristics of lightweight, low power consumption, high lifting capacity and long servicing life.

Features

With simple structure reliability
Further, improve the lifting capacity
fine insulation structure
special magnetic circuit

Technical Detail

Electromagnetic lift

ription

Electromagnetic lift

ription

Parameters

Model	Current (A)	Power (KW)	Lifting capacity(kg) (cold/hot state)			Weight(kg)	Overall dimensions (mm)					Commutation controlling unit	Cable reel cable adapter
			Lifting capacity(kg) (cold/hot state)				Overall dimensions (mm)
			Steel ball	Steel Ingot	Steel Scrap		A	B	C	D	E
MW5-70L/1	15	3.3	2500	380/200	120/100	490	700	800	160	90	30	STML-4E-C	JTA75-15-2 DL-102
MW5-80L/1	18	3.96	3000	480/250	150/130	620	800	800	160	90	30	STML-4E-C
MW5-90L/1	26.6	5.85	4500	600/400	250/200	800	900	1090	200	125	40	STQL-7E-C
MW5-110L/1	35	7.7	6500	1000/800	450/400	1350	1100	1140	220	150	45	STQL-9E-C	JTA100-15-2 DL-102
MW5-120L/1	45.5	10	7500	1300/1000	600/500	1700	1200	1180	220	150	45	STQL-14E-C
MW5-130L/1	54	11.9	8500	1400/1100	700/600	2060	1300	1240	250	175	50	STQL-14E-C
MW5-150L/1	71.2	15.6	11000	1900/1500	1100/900	2830	1500	1250	350	210	60	STQL-19E-C
MW5-165L/1	75	16.5	12500	2300/1800	1300/1100	3200	1650	1590	370	230	75	STQL-19E-C
MW5-180L/1	102.4	22.5	14500	2750/2100	1600/1350	4230	1800	1490	370	230	75	STQL-25E-C	JTA200-15-2 DL-202
MW5-210L/1	129	28.4	21000	3500/2800	2200/1850	7000	2100	1860	400	250	80	STQL-32E-C
MW5-240L/1	154	33.9	26000	4800/3800	2850/2250	9000	2400	2020	450	280	90	STQL-38E-C

Model	Current (A)	Power (KW)	Lifting capacity(kg) (cold/hot state)			Weight (kg)	Overall dimensions (mm)					Commutation controlling unit	Cable reel cable adapter
			Lifting capacity(kg) (cold/hot state)				Overall dimensions (mm)
			Steel ball	Steel Ingot	Steel Scrap		A	B	C	D	E
MW5-110L/1-75	27.6	6.07	6500	1000/800	450/400	1500	1100	1270	220	150	45	STQOL-14E-C	JTA100-15-2 DL-102
MW5-120L/1-75	33.6	7.4	7500	1300/1000	600/500	1850	1200	1220	220	150	45	STQOL-14E-C
MW5-130L/1-75	40.7	8.95	8500	1400/1100	700/600	2280	1300	1290	250	175	50	STQOL-19E-C
MW5-150L/1-75	51.4	11.3	11000	1900/1500	1100/900	3180	1500	1360	350	210	60	STQOL-25E-C
MW5-165L/1-75	55.6	12.2	12500	2300/1800	1300/1100	3840	1650	1670	370	230	75	STQOL-25E-C
MW5-180L/1-75	73.9	16.3	14500	2750/2100	1600/1350	4690	1800	1600	370	230	75	STQOL-32E-C
MW5-210L/1-75	98.5	21.7	21000	3500/2800	2200/1850	7500	2100	1900	400	250	80	STQOL-38E-C	JTA200-15-2 DL-202
MW5-240L/1-75	117.6	25.9	26000	4800/3800	2850/2250	9800	2400	2100	450	280	90	STQOL-45E-C	JTA200-15-2 DL-202

Model	Current (A)	Power (KW)	Lifting capacity(kg) (cold/hot state)			Weight(kg)	Overall dimensions (mm)					Commutation controlling unit	Cable reel cable adapter
Model	Current (A)	Power (KW)	Steel ball	Steel Ingot	Steel Scrap	Weight(kg)	A	B	C	D	E	Commutation controlling unit	Cable reel cable adapter
MW5-70L/2	12.77	2.8	2500	380/200	120/100	520	700	820	160	90	30	STML-4E-C	JTA75-15-2 DL-102
MW5-80L/2	16.1	3.54	3000	480/250	150/130	650	800	820	160	90	30	STML-4E-C
MW5-90L/2	20.5	4.51	4500	600/400	250/200	900	900	1110	200	125	40	STQL-7E-C
MW5-110L/2	27.5	6.05	6500	1000/800	450/400	1500	1100	1350	220	150	45	STQL-7E-C	JTA100-15-2 DL-102
MW5-120L/2	33.6	7.4	7500	1300/1000	600/520	1800	1200	1280	220	150	45	STQL-14E-C
MW5-130L/2	40.6	8.93	8500	1400/1100	700/600	2300	1300	1280	250	175	50	STQL-14E-C
MW5-150L/2	51.4	11.3	11000	1900/1500	1100/900	3200	1500	1620	350	210	60	STQL-14E-C
MW5-165L/2	60.6	13.3	12500	2300/1800	1300/1100	3500	1650	1630	370	230	75	STQL-19E-C
MW5-180L/2	95	20.9	14500	2750/2100	1600/1350	4500	1800	1510	370	230	75	STQL-25E-C	JTA200-15-2 DL-202
MW5-210L/2	104	22.91	21000	3500/2800	2200/1850	7400	2100	1910	400	250	80	STQL-25E-C
MW5-240L/2	118.6	26	26000	4800/3800	2850/2250	9800	2400	2080	450	280	90	STQL-32E-C

Services We Offer

Product Inspections

We will provide some free testing and reporting, if you need a third party test report, please inform in advance, and the buyer to pay the relevant costs.

Packing

Unless otherwise provided, Our Company will comply only with its minimum packing standards for the method of transportation selected. The cost of all special packing, loading or bracing requested by Buyer will be paid for by Buyer.

Transportation

We have professional and efficient transport team. Transport to custo-mer specified port and ship on time. Unless otherwise provided, Our Company shall use its judg-ment in determining carrier and routing.

Installation

Provide installation files , technical data , videos , drawing etc. Have a professional team of engineers, engineers available to service machinery overseas.

After-sale services

Guarantee the machine could meet production technical standard and performance requirements indi-cated in the contract. Rich spare parts and Professional main-tenance team, technical support team to communicate in time.