Product introduction
YZ Ladle Hook Casting Overhead Crane mainly consists of bridge, trolley, hook beam, crane travelling and electric part, etc.
Adopt double-girder structure below 125t and four-girder structure above 125t, the main grabbing device of main hook is fixed-spacing hook girder used to lift foundry ladle; auxiliary hook is used to work with main hook to dump the molten iron and do other subsidiary lifting operation; main hoisting and transportation equipment in steel mill and smelter workshop. Used for transshipment and pouring of liquid mill.
- Mainly used at the metallurgy and foundry place where the melten metal is lifted.
- Working class of complete machine is A7.
- Thermal-protective coating is added at the bottom of main girder.
- The assembling & test of the crane confirm to the document No.ZJBT[2007]375 which was issued by General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China.
- The place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document.
Features
- The crane is heat resistance type. It has fire prevention heat insulation protection devices.
- The trolley is equipped with special motor for metallurgy insulation class H.
- The trolley is matched with two sets brakes/double brake, double drive mechanism.
- Hard-toothed surface driven for reducer's gear.
- The electric is fully covered, dustproof, and heat insulation for cooling.
- The cabin's window use double-layer toughened glass, equipped with industrial air cooler.
Technical Detail
Lifting Trolley With Safety Brake
ription
Overhead Crane
ription
Cable Line Storage
ription
Main Beam Processing
ription
Rope Drum Processing
ription
Cabin Room
ription
Four Girders for YZ Metallurgy Crane
ription
Electric Assembly Area
ription
